1. Maximum inclination angle of headboard: 75 °, left and right inclination angle of bed surface: 15 °
2. Maximum external dimensions of the vehicle: length 1910mm x width 735mm x height (630-950) mm, chassis foot width 700mm, PP guardrail width 730mm 3. Bed size: 1910mm × 630mm × (630-950）mm 3. The maximum load-bearing capacity of the bed surface is 250kg 4. Oxygen cylinder rack and locking switch are installed below the head of the bed, and salt water rack holes are provided at the head and legs 5. The central control brake system is stable and reliable, with the central control wheel measuring 150mm directly. The guide wheel device can easily override and the direction is controllable usage method: To brake the central control brake system, step on the brake pedal of the central control wheel; To drive, press the foot pedal on the other side and release the brake 2. The guiding wheel device plays a directional and straight driving role. To go straight, step on one end of the guiding wheel on the side, and the guiding wheel will touch the ground. If not going straight, step on the other end of the guiding wheel on the side, and the vehicle can move in any direction When adjusting the height of the car surface, continuously stepping on the vehicle's lifting foot pedal will raise the bed surface. If you want the bed surface to lower, you can step on both lowering foot pedals at the same time 4. Bed tilt: If you step on the foot to lower the head, the head will lower; if you step on the foot to lower the leg, the leg will lower 5. Guardrail lifting: If the guardrail needs to be raised, it will automatically lock after being lifted to the highest position. To lower the guardrail, gently pull up the guardrail switch and you can lower the guardrail If you want to raise the headboard, please stand on the red handle under your head. If you want to lower the headboard, lift the red handle while lowering the headboard. When the headboard is lowered to the desired height, release the red handle 7. After placing the oxygen cylinder on the oxygen cylinder rack, lock both oxygen cylinder switches simultaneously
